Benz S350 10-12 High Beam Position Upgrade LED Bi-Lens Projector X6

Evening everyone!

Today we will come to a case of a year 2010-2012 Benz S350, the original headlight is xenon projector with D1S xenon lamp. 

Actually there are 2 ways of upgrading this car, 1st way is to replace the original xenon lamp to new xenon replacing bulb D1S or LED headlight bulb D1S. However, if you want high brighnesss, then it is better to upgrade LED projector lens, and this is the second way.

Today we will upgrade the X6 LED projector lens to the high beam position, so we can get 4 low beams and 4 high beams, much more brighter, let's see the installtion process.

First, take off the headlamp from the car and then open it as usual. And below you can see we need a high beam bracket for the projector lens( also called lens holder).

Install the blue buckle to the bracket

Installing turning auxiliary lighting bowl to the bracket

Don't damage the original variator shaft if you don't replace the original xenon projector.

And then install the LED projector lens X6 to the bracket.

Finally, seal the lampshade and install headlamp back to the car and then adjust the light.

Ok, installation work finished, let's enjoy the projector lens light at night! 

Below is low beam effect

And let's see the high beam effect! Much more brighter,about 5-6 times brigher!

Ok, that's all for today's Benz S series light case. If you have questions or feedbacks, contact us freely at: [email protected], technical support or detailed installation problems are also welcome!

Note: For this Benz S upgrade LED projector lens, a wire harness is needed for the power, also a 50W 5 Ω resistance is needed for canbus decoder. If the Benz S if of medium or high class model, the low beam is doctor step follow lens, a special module is needed for swiching high beam and low beam.