BMW7 Series Transfer HID Xenon Projector to X6 LED Projector Lens Headlight

Hi everyone, thanks for your attention, this is Ary from hellodido. 

Many people may think the headlight of BMW is very bright, actually it is. But after several years, the headlight is not bright anymore, this is called light decay. How to solve this problem? 

Ok, today we will show you a case of BMW 7 series produced in 2014 transfer headlight.

Actually there are 2 ways of upgrade this car's headlight, 1 way is to replace bulbs to new xenon replacing bulbs D1S or LED headlight bulbs D1S, however, the brightness hasn't changed much as the xenon projector also getting old. So today we will use another way, to transfer the xenon projector to LED projector lens headlight directly.

Ok, from the above 2 pictures, you can see the brightness is not enough, let's get started for our work!

Today we will use this X6 projector lens, which is very good quality and super brightness. 

Firstly, take off the headlamp from the car and then open the headlamp.

You may don't believe this is the headlamp of BMW 7 series!

The installation work takes about 4-5 hours, as this is a follow-up headlamp, we also need a projector lens bracket for the installation.

If you have any installtion prolems, welcome to contact us, we can offer technical support if needed.

Ok, work finished, let's enjoy the X6 LED projector lens headlight!

And also high beam effect

So it is clear that after transformation, the headlight brightness has increased by more than 4 times!

Ok, that's today's BMW 7 series transformation. If you have questions or feedbacks, contact us freely at: [email protected], technical support or installation problems are also welcome!

Note: Remember to remark the motor of the headlight right and left and install back to headlamp. Stepping light converter module is also needed for swiftting to low beam and high beam.